Unitymedia Kabemodem startet im Minutentakt neu

[Hennis]

Hallo,
mein Kabelmodem hat sich von gestern ca. 23:00 bis heute früh ca. 8:00 im Minutentakt ständig rauf- und runtergefahren, auch aus dem Standby.
Log der letzten Minuten davon siehe unten.
Schön dass es jetzt anscheinend vorbei ist, aber ich wüsste schon gerne, was das war.
Kann jemand damit etwas anfangen?
Gruß,
Hennis

2007-11-28 10:05:21 7-Information Cable Modem switched into non-Standby Mode
2007-11-28 07:55:22 7-Information Channel Change Complete - Enabling Bridge
2007-11-28 07:55:22 7-Information C203.0 DCC arrive new
2007-11-28 07:55:22 7-Information Starting Ranging On Channel 7
2007-11-28 07:55:22 7-Information Upstream Channel Change Requested - Disabling Bridge
2007-11-28 07:55:22 7-Information C202.0 DCC depart old
2007-11-28 07:55:15 7-Information SNMP: Working in SNMP V1/2c Only NmAccess mode
2007-11-28 07:55:13 7-Information INITIALIZATION COMPLETE - MODEM IS OPERATIONAL
2007-11-28 07:55:13 7-Information PROG: SW Download File name the same as currently run.
2007-11-28 07:55:13 7-Information SEC: Mfg CVC from configuration file was verified
2007-11-28 07:55:12 7-Information B401.0 Authorized
2007-11-28 07:55:12 7-Information REGISTRATION COMPLETE - Waiting for Operational status
2007-11-28 07:55:12 7-Information REG: Capability type <15> isn't supported by CMTS
2007-11-28 07:55:12 7-Information REG: Capability type <3> isn't supported by CMTS
2007-11-28 07:55:12 7-Information Registration file - downloaded
2007-11-28 07:55:11 7-Information Trying to download Configuration file ...
2007-11-28 07:55:11 7-Information Time of day - retrieved
2007-11-28 07:55:11 7-Information DHCP - parameters acquired
2007-11-28 07:55:11 7-Information DHCP: ACK: Setting (*) CM TFTP Boot file: BE_Gold_2_SBV5121_d.cfg
2007-11-28 07:55:11 7-Information DHCP: Setting CM IP address to: 10.77.195.253
2007-11-28 07:55:11 5-Warning D03.0 DHCP WARNING - Non-critical field invalid in response
2007-11-28 07:55:11 5-Warning DHCP: Missing Syslog server
2007-11-28 07:55:11 7-Information DHCP: Setting (*) CM Time Server address to: 80.69.100.6
2007-11-28 07:55:11 7-Information DHCP: Setting (*) CM Subnet mask to: 255.255.224.0
2007-11-28 07:55:11 7-Information DHCP: Setting (*) CM Gateway address to: 10.77.192.1
2007-11-28 07:55:11 7-Information DHCP: OFFER: Setting (*) CM TFTP Boot file: BE_Gold_2_SBV5121_d.cfg
2007-11-28 07:55:11 7-Information DHCP select: Setting (*) CM TFTP Server address to: 80.69.100.6
2007-11-28 07:55:11 7-Information DHCP: Offered (*) CM IP address to: 10.77.195.253
2007-11-28 07:55:07 7-Information Trying to register through CMTS...
2007-11-28 07:55:07 7-Information SYNCHRONIZED - 642000000 Hz , ucd 6
2007-11-28 07:55:06 7-Information Starting Ranging On Channel 6
2007-11-28 07:55:02 7-Information Downstream Locked - Collecting Upstream Information
2007-11-28 07:54:59 7-Information Scanning frequency 642000000Hz
2007-11-28 07:54:59 7-Information Trying to synchronize ...
2007-11-28 07:54:54 3-Critical T04.0 SYNC Timing Synchronization failure - Failed to receive MAC SYNC frame within time-out period
2007-11-28 07:54:54 4-Error SYNC: Hardware didn't detect SYNC msg for 600ms during Initial Ranging
2007-11-28 07:54:54 7-Information Synchronization LOST <642000000 Hz - ucd 6, Station Maintenance T4 Timeout or Ranging ABORT>
2007-11-28 07:54:54 3-Critical R07.0 Unicast Ranging Received Abort Response - Re-initializing MAC
2007-11-28 07:54:11 7-Information SNMP: Working in SNMP V1/2c Only NmAccess mode
2007-11-28 07:54:09 7-Information INITIALIZATION COMPLETE - MODEM IS OPERATIONAL
2007-11-28 07:54:09 7-Information PROG: SW Download File name the same as currently run.
2007-11-28 07:54:09 7-Information SEC: Mfg CVC from configuration file was verified
2007-11-28 07:54:08 7-Information B401.0 Authorized
2007-11-28 07:54:08 7-Information REGISTRATION COMPLETE - Waiting for Operational status
2007-11-28 07:54:08 7-Information REG: Capability type <15> isn't supported by CMTS
2007-11-28 07:54:08 7-Information REG: Capability type <3> isn't supported by CMTS
2007-11-28 07:54:08 7-Information Registration file - downloaded
2007-11-28 07:54:07 7-Information Trying to download Configuration file ...
2007-11-28 07:54:07 7-Information Time of day - retrieved
2007-11-28 07:54:06 7-Information DHCP - parameters acquired
2007-11-28 07:54:06 7-Information DHCP: ACK: Setting (*) CM TFTP Boot file: BE_Gold_2_SBV5121_d.cfg
2007-11-28 07:54:06 7-Information DHCP: Setting CM IP address to: 10.77.195.253
2007-11-28 07:54:06 5-Warning D03.0 DHCP WARNING - Non-critical field invalid in response
2007-11-28 07:54:06 5-Warning DHCP: Missing Syslog server
2007-11-28 07:54:06 7-Information DHCP: Setting (*) CM Time Server address to: 80.69.100.6
2007-11-28 07:54:06 7-Information DHCP: Setting (*) CM Subnet mask to: 255.255.224.0
2007-11-28 07:54:06 7-Information DHCP: Setting (*) CM Gateway address to: 10.77.192.1
2007-11-28 07:54:06 7-Information DHCP: OFFER: Setting (*) CM TFTP Boot file: BE_Gold_2_SBV5121_d.cfg
2007-11-28 07:54:06 7-Information DHCP select: Setting (*) CM TFTP Server address to: 80.69.100.6
2007-11-28 07:54:06 7-Information DHCP: Offered (*) CM IP address to: 10.77.195.253
2007-11-28 07:54:03 7-Information Trying to register through CMTS...
2007-11-28 07:54:03 7-Information SYNCHRONIZED - 642000000 Hz , ucd 6
2007-11-28 07:54:01 7-Information Starting Ranging On Channel 6
2007-11-28 07:53:57 7-Information Downstream Locked - Collecting Upstream Information
2007-11-28 07:53:55 7-Information Scanning frequency 642000000Hz
2007-11-28 07:53:55 7-Information Trying to synchronize ...
2007-11-28 07:53:50 3-Critical T04.0 SYNC Timing Synchronization failure - Failed to receive MAC SYNC frame within time-out period
2007-11-28 07:53:50 4-Error SYNC: Hardware didn't detect SYNC msg for 600ms during Initial Ranging
2007-11-28 07:53:49 7-Information Synchronization LOST <642000000 Hz - ucd 6, Station Maintenance T4 Timeout or Ranging ABORT>
2007-11-28 07:53:49 3-Critical R07.0 Unicast Ranging Received Abort Response - Re-initializing MAC
2007-11-28 07:52:34 7-Information SNMP: Working in SNMP V1/2c Only NmAccess mode
2007-11-28 07:52:32 7-Information INITIALIZATION COMPLETE - MODEM IS OPERATIONAL
[/size]

 

[mischobo]

... bitte bei Störungen möglichst auch den Ort des Geschehens angeben. Danke ...

 

[Hennis]

Oh, sorry!
Bonn, Innenstadt. 2play.
Ist ja wie gesagt seit 8:00 heute früh vorbei - und ich habe eben einen Kollegen gefragt, der drei Häuser weiter auch Kabelmodem hat (alledings ohne Telefon und ein älteres Modell): bei dem war nichts.
Würde mich trotzdem interessieren, was das war (und hoffen, dass es nicht wieder vorkommt!)
Gruß,
Hennis

 

[Red-Bull]

REINIT_MAC: R07.0 Unicast Ranging Received Abort Response. Reinitializing MAC.

Explanation The cable modem is online and sent a periodic Ranging Request (RNG-REQ) message to the CMTS, but it received an Abort Ranging reply from the CMTS. The cable modem is therefore resetting its cable interface and restarting the registration process. This error message is DOCSIS event message is R07.0, Ranging Request.

Recommended Action No action is needed, because the CMTS can send an Abort Ranging response when it determines that the cable modem is not operating at optimum levels on its current upstream and downstream channels. If this problem persists, check the RF plant for cabling or connector issues that could be generating noise on the upstream. If using a Cisco CMTS, you can use the show cable flap-list command to determine if other cable modems on the upstream are having problems. You can also use the show interfaces cable upstream command and examine the noise, microreflection, and uncorrectable error counters to determine the level of noise on the upstream.

 

[Hennis]

Aha :kafffee:
Danke auf jeden Fall!
ich hoff' jetzt doch mal, dass das nicht wieder auftritt

Grüße,
Hennis

 

[störung]

Bei mir macht es das auch, habe dann die techn. Hotline deswegen befragen wollen, aber die meinten sofort ich hätte durch das Aufrufen des Modem-Interfaces wichtige Einstellungen verändert und das Modem müsse nun getauscht werden. U.U. sogar kostenpflichtig. Interessant, dass es im Moment trotzdem funktioniert und bei dem Ersteller dieses Threads auch nichts explodiert ist obwohl er das böse Interface aufgerufen hat.... oder? :zwinker:

 

[Red-Bull]

Post mal deine Logs und mal deine Modemwerte !

 

[Hennis]

Nö, nichts explodiert
und: ERST hat das Modem gesponnen, und DANACH habe ich das Interface aufgerufen und den Log kopiert
- da verwechselt die Hotline wohl die Henne mit dem Ei.
und: kopieren (oder in Deinem Fall: interface aufrufen und angucken) ist nicht gleich Einstellungen ändern.

Ich glaube, ich hätte denen etwas erzählt!
zum Glück ist es bisher seitdem ruhig und funktioniert, soweit ich das mitbekomme.
Hennis