Unitymedia signalstärke & qualität.(modemwerte-zu hoch?)

[wega]

--------------------------------------------------------------------------------

guten morgen!hätte eine kurze frage,habe bei tt-micro-c274receiver,100%signalstärke&100%signalqualität-bei echostar601 hd recorder-nur,80%signalstärke&75%signalqualität,(alle programme)habe beide an der gleichen dose probiert!und würden die werte bei dem rcoerder für hd programme reichen?zurzeit habe ich nur ard,zdf,arte,hd.

unitymedia 3 play internet 32mb tv highlights .telefon flat .nachtrag ; habe klötzchenbildung!!(zb,syfy-sd.grad eben bemerkt)
nur bei hd recorder,micro-c274 receiver läuft ohne störung.
vielen dank!!!!
2,=modem wert bei upstream scheint zu hoch power level 54 dbmv,zuviel oder?
hd recorder ,an durchgangsdose-cisco modem an enddose,habe in einen zimmer zwei antennendosen!!!

meine modem werte.



Cisco EPC3208 EuroDocsis 3.0 2-PORT EMTA EPC3208





Status

Voice

Log OFF





DOCSIS WAN
DOCSIS Signal
DOCSIS Status
Channels Selection
DOCSIS Log


Downstream Channels
Channel 1:
Channel ID: 80
Downstream Frequency: 642000000 Hz
Modulation: 256 QAM
Power Level: 3.5 dBmV
Signal to Noise Ratio: 38.6 dB
Channel 2:
Channel ID: 27
Downstream Frequency: 618000000 Hz
Modulation: 256 QAM
Power Level: 1.5 dBmV
Signal to Noise Ratio: 38.6 dB
Channel 3:
Channel ID: 78
Downstream Frequency: 626000000 Hz
Modulation: 256 QAM
Power Level: 2.8 dBmV
Signal to Noise Ratio: 38.3 dB
Channel 4:
Channel ID: 79
Downstream Frequency: 634000000 Hz
Modulation: 256 QAM
Power Level: 2.9 dBmV
Signal to Noise Ratio: 38.1 dB
Channel 5:
Channel ID: Not used
Downstream Frequency: 0
Modulation: unknown
Power Level: 0.0 dBmv
Signal to Noise Ratio: 0.0 dBmv
Channel 6:
Channel ID: Not used
Downstream Frequency: 0
Modulation: unknown
Power Level: 0.0 dBmv
Signal to Noise Ratio: 0.0 dBmv
Channel 7:
Channel ID: Not used
Downstream Frequency: 0
Modulation: unknown
Power Level: 0.0 dBmv
Signal to Noise Ratio: 0.0 dBmv
Channel 8:
Channel ID: Not used
Downstream Frequency: 0
Modulation: unknown
Power Level: 0.0 dBmv
Signal to Noise Ratio: 0.0 dBmv


--------------------------------------------------------------------------------

Upstream Channels
Channel1:

Channel ID: 1
Upstream Frequency: 56780000 Hz
Modulation: 64 QAM
Bit Rate: 15360 kBits/sec
Power Level: 54.0 dBmV
Channel2:

Channel ID: 4
Upstream Frequency: 47380000 Hz
Modulation: 64 QAM
Bit Rate: 15360 kBits/sec
Power Level: 54.0 dBmV
Channel 3:

Channel ID: Not used
Upstream Frequency: 0 Hz
Modulation: 0 QAM
Bit Rate: 0 kBits/sec
Power Level: 0.0 dBmV
Channel 4:

Channel ID: Not used
Upstream Frequency: 0 Hz
Modulation: 0 QAM
Bit Rate: 0 kBits/sec
Power Level: 0.0 dBmV